-
Fire Products
- Fire Extinguishers
- Hose Reels and Cabinets
- Fire Blankets
- Fire Resisting Safes and Cabinets
- Emergency Response Equipment
- Residential Fire Products
-
Breathing Apparatus
- Escape Breathing Apparatus
- Self Contained Breathing Apparatus (SCBA)
- Airline Breathing Apparatus
- Emergency Air System: Pro-Cab
- Resuscitation: Manual and Automatic Resuscitation System (MARS)
- Facemasks
- Filtered Respiratory Systems
- Military Facemasks
- Self Contained Breathing Apparatus (SCBA) Cylinders
- Compressors and Fill Stations
- Communications Devices
- Personal Alarm Safety System Automatic Distress Signal Unit and Telemetry Systems
- Quantitative Fit Testing
- Thermal Imaging
- Portable and Area Lighting
-
Gas Detection - Portable
- Scout® Multi-Gas Monitor
- Proton® Single Gas Monitor
- Proton® ZM Single Gas Monitor
- AreaConnect 500 Application
- AreaRAE Compact Multi-gas Monitor
- AutoRAE Lite Bump and Calibration Station
- EntryRAE Confined Space Entry Monitor
- GammaRAE II Personal Radiation Detector
- MiniRAE 3000 Portable Handheld VOC Monitor
- MultiRAE Plus One-to-Five Gas Monitor
- QRAE II Multi-gas Detector
- ToxiRAE 3 Personal Gas Monitor
- RAE Systems Piston Hand Pump
- Gas Detection - Fixed
- Passive Fire Products
-
Fire Systems
-
Alarm and Evacuation
- MX Technology
- VIGILANT® MX1 Fire Indicator Panel
- VIGILANT® F3200 Fire Indicator Panel
- VIGILANT® MX4428 Fire Indicator Panel
- VIGILANT® QE90 Emergency Warning and Intercommunication System (EWIS)|
- Tyco 614 Series Fire Detectors
- MX Series Addressable Modules
- MX VIRTUAL® Multi-Sensor Fire Detectors
- Warning Systems Ancillaries – Audio
- Warning Systems Ancillaries – Visual
- T-GEN 50 Tone Generator
- Mk2 Audio Visual Indicator
- MINERVA® S200 PLUS Triple Waveband Infrared Flame Detection
- STI-CIS Speech Intelligibility Meter
- VESDA systems
- Fire Sprinkler Systems
- Gaseous Agents
- Water Spray Deluge Systems
- Water Mist Systems
- Foam Systems
- Vehicle Fire Suppression
- Kitchen Fire Suppression
-
Alarm and Evacuation
- Design Install Commission
-
Services
- Servicing and Maintenance
- Compliance and Testing
- Specialised Fire Protection Solutions
-
Fire Safety Training
- Fire Extinguisher Training Using Portable Fire Fighting Equipment
- Breathing Apparatus Training
- Confined Space Entry Training
- Fire Safety Advisor Training QLD only
- Fire Safety Officer Training Level 1 NSW only
- Spill Response Training
- Emergency Control Organisation Warden Training
- Chief and Deputy Chief Warden Training
- Evacuation Exercise
- General Staff Emergency Awareness Training
- First Aid Training
- Warden Refresher Training
- Lay Flat Hose Training
- Fire Monitoring
- VESDA System Service
- Industry Capabilities
- About Us
- Contact Us
- News and Information
- Resource Centre
Quantitative Fit Testing
Because your health and safety are too important to leave to chance, Wormald now provides a Quantitative Facial Fit Testing service of your personal respiratory device to safeguard you against accidental inhalation of contaminants such as Severe Acute Respiratory Syndrome (SARS), Avian Influenza and other infectious and airborne diseases.
Inhalation is the most common route by which foreign and often dangerous substances may enter the body. Therefore, where there is a risk of exposure to potentially infectious airborne contaminants, a facial respirator should always be worn. Whilst personal respiratory devices, such as full and half-face masks, are essential in preventing the spread of infectious diseases, did you know that a poorly fitting face mask may not be protecting you at all?
The importance of fit testing
Humans come in a variety of shapes and sizes – and so do personal respirators. That is why a perfect facial fit is paramount in obtaining optimum protection. A poor fitting respirator may lead to a leakage of contaminants into the breathing zone, thereby compromising the safety of the wearer. In fact, if you are wearing a personal respirator that has not been adequately fit tested, you may be gambling with your health.
Wormald’s highly trained fit testing personnel utilise the very latest PORTACOUNT® Plus Universal System ensuring a perfect fit, with absolutely no guesswork. And of course all our equipment is in full compliance with Australian Standard AS/NZS 1715:1994, which provides recommendations for the selection, use and maintenance of all personal respiratory protective devices.
Unlike other facial fit testing methods, Wormald’s Quantitative Facial Fit Testing service does not rely on a subjective response, eliminating the human variables associated with qualitative methods.
Advantages of Wormald’s Quantitative Fit Testing service:
- Elimination of guess work
- Accurate results immediately
- Hard copy documentation of results provided
- Full compliance to AS/NZS1715:1994 clause 7.5
- Ability to fit test any type of respirator
- Fit is performed using individual’s actual mask.
Related Documents
Life Safety & Rescue Catalogue
Quantitative Facial Fit Testing Brochure
At Wormald we offer a range of fire equipment, fire safety products and fire services for the Australian market.